English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Received: 4 August 2017 Accepted: 18 April 2018 Burning rates of the biodiesel B7 and blended with 10 %vol. and 15 %vol ethanol in 50 mm diameter of pan were investigated. Angle of the pan wall was set to 0 deg. and 60 deg. and 1 m/s to 3.5 m/s of longitudinal air, flows across the pan. Results show that, as increase in the longitudinal airflow speed, the burning rates of biodiesel B7+15 %vol ethanol increased, but it decreased for the biodiesel B7 and biodiesel B7+10 %vol. ethanol. Moreover, burning rate of 0 deg. is higher than that 60 deg. for all cases. It is concluded that for the case of biodiesel B7+15 %vol ethanol, incoming air helps in increasing the burning rate. But for biodiesel B7 and biodiesel B7+10 %vol. ethanol, the incoming air reduces the pan temperature and leads to low burning rate. Furthermore, 0 deg. case gives a higher burning rate for all fuels because flame tilt significantly and increased the rate of heat transfer by conduction and radiation from the flame to the fuel. The 60 deg. case showed that flame is less tilted thus leads to less burning rate.

Investigation on the Mass Burning Rate of Biodiesel Blended with Ethanol Subjected to Cross Airflow