English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Received: 5 April 2018 Accepted: 29 November 2018 Heat generated during rock drilling, due to friction at the bit-rock interface. Due to which temperature increases, which can influence the thermal stress and subsequent rock failure. In this paper, an attempt is made to present results related to the temperature assessment during rotary drilling of rocks on medium-grained sandstone under controlled laboratory conditions. The experiments were conducted by using embedded thermocouple technique, the thermocouple was placed at a distance of 0.5mm (horizontal) from the bit-rock interface. The influence of operational parameters, i.e., the diameter of the drill bit, spindle speed and rate of penetration of rise in temperature was studied using multiple regression and data analysis was carried out using analysis of variance (ANOVA). The temperature was measured by using embedded thermocouple technique at a depth of 6mm, 14mm, 22mm and 30mm respectively. Regression models were developed for the prediction of temperature at the bitrock interface. It was observed that the increase in temperature for medium-grained sandstone was from 490C to 740C (51.08%) with an increase in the diameter of the drill bit, spindle speed and rate of penetration.

Experimental investigation and statistical analysis of operational parameters on temperature rise in rock drilling