English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In this study, submicron-sized alumina reinforced aluminum matrix composites with various alumina (Al 2 O 3 ) content ( 0, 0.5, 1, 1.5, 2, 2.5wt.%) were fabricated by the powder metallurgy method. As a result of the mechanical tests performed to the composite materials, the best mechanical properties were obtained at the Al-2%Al 2 O 3 composite structure. Cold working at the different cold work strain ratios was performed to increase the mechanical properties of Al-2%Al 2 O 3 composites. The effect of cold working on the porosity, apparent density, tensile strength, and Vickers hardness of Al-2%Al 2 O 3 composites was investigated. The microstructure and crystal structure of materials were analyzed with X-ray diffraction (XRD) device and scanning electron microscopy (SEM), respectively. According to the test results, the mechanical properties of Al-2%Al 2 O 3 composite were enhanced up to 11.8.% cold working rate. It was determined that the Vickers hardness increased from 43 HV to 68 HV (+53%) and the compressive strength improved from 71 MPa to 92 MPa (+30%) for 11.8% cold working rate in Al-2%Al 2 O 3 composite structure.

Mikron Altı Boyutlu Alümina Katkısının ve Soğuk Deformasyon İşleminin Üretilen Alüminyum Kompozit Yapının Mekanik Özellikleri ve Mikroyapısına Etkisi