English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The purpose of this study was to compare the effect of casting temperature and atmosphere on the castability of three Ni-Cr alloys against direct flame casting method. Vera Bond (VB), Vera Bond 2 (VB2) and Wiron 99 (W99) were cast at three temperatures: VB and VB2 (1310 °C, 1340 °C and 1370 °C); W99 (1400 °C, 1430 °C and 1460 °C) in atmosphere, vacuum and direct flame. Each alloy was cast in seven different conditions. Castability was assessed by the method that verifies the alloy potential to reproduce a nylon mesh. Kruskal-Wallis test demonstrated for VB, while there was no influence in the temperature range, castability was greater by vacuum (99.3%) than by direct flame (96.2%) and atmosphere (93.06%). For VB2, castability was greater at evaluated temperatures (1370 °C = 94.4%, 1340 °C = 91.15% and 1310 °C = 87.9%) than direct flame (77.8%); related vacuum (97.33%) obtained better values than atmosphere (84.6%) and direct flame. For W99, while atmosphere had no influence, castability was higher at 1460 °C (84.3%) than at other temperatures (1430 °C = 70.3%, 1400 °C = 37.05%) and direct flame (62.5%). Comparison among interactions showed that for all alloys it was possible to significantly increase the filling percentage of the mold in a comparative manner with the direct flame cast method

Effect of casting temperature and atmosphere on castability of Ni-Cr alloys: a comparative study with direct flame casting method