English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The effects of heat treatment on the microstructural evolution and mechanical behavior of Al-Si-Cu alloy were investigated. Solution heat treatment was performed at 500oC/6h and 540oC/6h, followed by quenching in warm water at 60oC. Lastly, artificial ageing treatment was performed at 160oC/6h, 190oC/4h and 210oC/2h. The microstructural evolution of the samples before and after heat treatments was analyzed by optical microscopy, scanning electronic microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). Analyses revealed the presence Al5FeSi, Al15(FeMn)3Si2, Al2Cu and Si particles. The morphologies of the present phases were dependent on the heat treatment. Solution treatment at 540oC/6h resulted in significant softening of the alloy compared with the treated samples at 500oC/6h. Vickers hardness analysis indicated that the hardness peak of the alloy after heat treatment was about 125 HV. Mechanical properties of different phases have been investigated by nanoindentation technique, which indicated that the highest hardness and modulus of elasticity were found for the Si particle, especially those distributed in the microstructures of the samples submitted to higher solution and ageing temperatures.

Investigation and Nanomechanical Behavior of the Microconstituents of Al-Si-Cu alloy After Solution and Ageing Heat Treatments