English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Laser cladding on grey cast iron at high power processing was investigated for microstructural evolution and phase transformation to enhance surface properties. Cladding was designed using a mixture of DOE with peak power (Pp) and pulse repetition frequency (PRF), and a mixture component of Cr and Mo ratio as factors. Microstructural findings indicated absolute elimination of graphite phase from the clad zone, in conjunction with particles evolution occurrence. Meanwhile, Cr, Mo and Fe phases were detected on the clad surface, along with M-C carbide, retained austenite and MoFe formation. The clad surface with addition of Mo exhibited a high hardness value of 945.5 HV0.1 due to carbide formation. As a result of high peak power penetration into substrate surface, the depth range of clad zone was 53 to 131 µm. From the optimisation, the highest desirability is 82.3 %. Cladding with molybdenum powder addition was found to have produced minimum surface roughness, maximum depth and hardness of 9.14 µm, 110 µm and 891.1 HV0.1, respectively.

Microstructural Evolution and Phase Transformation in Laser Cladding of Cr and Mo Powder on Grey Cast Iron: Mixture Design of Experiment (DOE)