English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In this paper, the optimization of computer numerical control (CNC) machining parameters were conducted using the Taguchi design method on the surface quality of massive wooden edge glued panels (EGP) made of European larch (Larix decidua Mill). Three machining parameters and their effects on surface roughness were evaluated. These parameters included tool clearance strategy, spindle speed, and feed rate. An analysis of variance (ANOVA) was performed to identify the significant factors affecting the surface roughness (Ra and Rz). Optimum machining parameter combinations were acquired by conducting an analysis of the signal-to-noise (S/N) ratio. Optimal cutting performance for the Ra and Rz was obtained for the cutter at a tool clearance strategy of an offset 16000 rpm spindle speed and 1000 mm/min feed rate. The surface roughness, both the Ra and Rz, increased with increasing feed rate. Optimal cutting performance for Ra and Rz was obtained for a tool clearance strategy of an offset 16000 rpm spindle speed, and 1000 mm/min feed rate cutting settings. Based on the confirmation tests, Ra decreased 2.2 times and Rz 1.8 times compared to the starting cutting parameters.

bioresources

Determination of Optimal Machining Parameters of Massive Wooden Edge-Glued Panels Made of European larch (Larix decidua Mill.) using Taguchi Design Method