English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Extraction chromatographic resin prepared by impregnating CMPO-RTIL (C 8 mim + ·NTf 2  − ) on Chromosrob-W for the removal of trivalent actinides and lanthanides from aqueous solutions showed a significant improvement over the previously reported CMPO- n -dodecane resin. The resin was characterized by thermal analysis, for surface area by BET and for surface morphology by SEM. The  K  d  value of Am(III) by CMPO-RTIL resin was found to be 5805 and 3.8E4 with 3 M and 0.01 M HNO 3 , respectively. The high  K  d  values at lower acidity suggested metal ion uptake following a cation exchange mechanism usually seen with ionic liquid based solvents and use of 0.01 M EDTA resulted in a  K  d  value of 0.11 which was subsequently used as the strippant. Uptake of other actinide ions such as UO 2  2+ , Pu 4+ , Np 4+  and fission product element ions such as Eu 3+ , Sr 2+  and Cs +  was also studied. Column studies using a feed containing 1 g/L Eu(III) in 3 M HNO 3  suggested complete uptake of the metal ion up to passing 7 mL of the feed solution which corresponded to a column capacity of 7 mg of Eu. The loaded Eu(III) from the columns could be efficiently eluted with 0.01 M EDTA. The column capacity for Eu(III) was measured in the successive cycles of loading and elution and was found to be stable up to 60 d. The results suggested the possible application of the resins in the treatment of dilute laboratory radioactive waste.

radiochimica acta

Evaluation of an extraction chromatographic resin containing CMPO and ionic liquid for actinide ion uptake from acidic feeds: Part II. Batch actinide sorption, radiolytic degradation and column studies