English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Previous paper (Rahman et al.  2017 ) showed that the yield of softwood kraft pulp increased by the addition of either polysulfide or sodium borohydride because of higher hemicellulose retention. An increase in hemicellulose content can make dewatering more difficult as WRV of the pulp increases, but instead, an overall increase in pulp yield could improve dewatering as a sheet of a certain weight will contain fewer fibres, giving a more open sheet structure. It was therefore of interest to measure the dewatering properties of low grammage handsheets (20 g/m 2 ) under conditions mimicking the tissue paper machine dewatering processes, and sheet strength properties, WRV, °SR and fibre dimensions were also studied. The results showed that the positive influence of overall yield increase dominated over the negative influence of an increase in hemicellulose content on the dewatering properties, particularly at lower refining energy levels. Moreover, higher yield and higher hemicellulose content pulps had a higher tensile index at the same dryness. A given tensile index was achieved with less refining energy. The results indicate that increased yield and hemicellulose content by modification of the kraft pulping process will result in a pulp with a potential to improve tissue paper quality.

Dewatering properties of low grammage handsheets of softwood kraft pulps modified to minimize the need for refining