English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The present research work studied and evaluated conditions of pre-weld and post-weld heat treatments for the laser welding process, aiming to avoid weld cracking, which usually occurs after tungsten inert gas and/or laser welding processes in cast nickel-based superalloys with high aluminum and titanium contents. The pre-weld heat treatment conditions used in the experiments were (1) 1473 K for 7.2 ks, (2) 1433 K for 7.2 ks + 1298 K for 56.7 ks, (3) 1413 K for 7.2 ks + 1298 K for 56.7 ks, (4) 1393 K for 7.2 ks + 1298 K for 56.7 ks. A laser welding process on cast nickel-based superalloys, grade GTD-111, with metal filler of Inconel 718, a nickel-iron based alloy was conducted. From all obtained results, it was found that the pre-weld heat treatment conditions significantly influence microstructures before laser welding. After laser welding and post-weld heat treatment at a temperature of 1473 K for 7.2 ks followed by precipitation aging at a temperature of 1118 K for 86.4 ks (standard heat treatment), all welded specimens exhibited similar microstructures and hardness values. Furthermore, no weld cracking was observed in all welded specimens.

Influence of pre- and post-weld heat treats on microstructures of laser welded GTD-111 with IN-718 as filler metal