English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the zaia usage as premium feature

ZAIA

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the access of premium content as premium feature

Premium Content

Zendy Tools

Zendy Open

In this study, the wear behaviour of the composite material obtained as a result of the coating process by adding nano-size powder to the consumable rod with the friction surfacing method was investigated. An amount of 3–5 wt% nano graphene and carbon nano tube (CNT) were added into the hole drilled at a certain depth in the center of the consumable rod, and then the rod was subjected to sintering process. The obtained consumable rod was deposited on the substrate material at a certain rotational speed, horizontal and vertical progression speeds by friction surfacing method. Wear tests were carried out by subjecting the deposited surface samples to the pin-on-disc wear test. According to the results obtained, the increase in the additive ratio decreased the wear rate by approximately 30% in the 3 wt% graphene additive sample and 75% in the 5 wt% additive sample for 900 m wear distance. The same CNT additive ratios decreased the wear rate in the sample by 41% and 58%, respectively.

Effect of nano graphene and CNT addition on coating properties in friction surfacing process