English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

Bolted joints are one of the most used joining technologies in engineering. It is possible to join different kind of materials and to transmit heavy loads. Nevertheless, they are vulnerable to fatigue cracks. The present research investigates the dependency between the preload of the bolt and the initiation of a fatigue crack in the bolted sheet. Therefore, a representative bolt connection with a bolt of size M22 was selected in combination with a 5 mm thick sheet made of steel S355MC (1.0976). The bolted sheet was loaded by a fluctuating tension load and a load ratio of 0.1. The test results show a strong correlation of the preload and the number of load cycles to crack for preloads from 0 kN to 30 kN. The load cycles to crack are increased by about factor 20 by using a preload in contrast to the sheet without any preload. For higher preloads, the load cycles to crack does not change considerably. However, the crack initiation location changes by increasing the preload. For small preloads, the crack starts at the bolt hole, and for high preloads, the crack starts at the fretting zone.

Fatigue behavior of bolted boreholes under various preloads