English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

Polylactic Acid (PLA) experiences widely spread applications in Fused Filament Fabrication (FFF) owing to its relatively high stiffness, strength, and environmentally friendly biodegradability. Reinforcing inclusions like short carbon fibers are introduced to virgin PLA feedstock aiming to improve the mechanical performance of FFF-made products. Nevertheless, the rigid fibers significantly reduce the ductility of the overall fabricated parts. This study prepares sandwich specimens with PLA as core and its 10 wt% chopped carbon fiber reinforced composites (i.e., CF/PLA) as shell via a low-cost FFF-based multi-material additive layered manufacturing method. The sandwich specimen has three layers, which are changed according to different material volumes, which is able to design the local strength and toughness performances of a printed part. Tensile properties of these sandwich samples printed in the different volumetric rates of virgin PLA constituents are measured. It is found that the strength of sandwich specimens with 20% vol of PLA reduces noticeably as compared to the full CF/PLA specimens. The 80% vol specimens exhibit a competitive strength as compared to the 40% and 60% vol specimens, while its toughness increases notably as compared to the other cases. Finite element simulations of the layered manufacturing process show that the thermal residual stresses of 20% vol sandwich accumulates most significantly. We also explore the effects of thermal annealing on the prepared sandwiches. Experimental results indicated that the post-annealing process improved the strength and stiffness of the sandwich specimens, while enhancing the stability of the mechanical properties of the FFF printed sandwich.

international polymer processing

Tensile properties of sandwich-designed carbon fiber filled PLA prepared via multi-material additive layered manufacturing and post-annealing treatment