English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Vacuum electron beam welding was applied to a 50 mm-thick TA15 titanium alloy plate. Microstructure observation and microhardness testing were performed. Meanwhile, the residual stress on the surface at different distances from the weld centre was measured via the hole drilling method. A finite element model for electron beam welding of the TA15 titanium alloy plate was constructed on commercial finite element software. Experimental results showed that the microstructure of the weld zone consisted of a basket martensitic phase. The highest microhardness in the weld zone was 409 HV, and the microhardness of the base metal was the lowest. The maximum gradient change area was located at the HAZ near the base metal. The peak value of longitudinal residual stress from the simulation was 880 MPa, which was in the weld metal. The sharp change area of longitudinal residual stress gradient was located in the base metal near HAZ.

Microstructure and residual stress distribution of electron beam-welded joints of a 50 mm-thick TA15 titanium alloy plate

Microstructure and residual stress distribution of electron beam-welded joints of a 50 mm-thick TA15 titanium alloy plate