English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The stress relaxation, creep-recovery, temperature, and frequency sweep tests were performed within the linear viscoelastic region by using a dynamic mechanical analyzer to investigate the viscoelastic characteristic of oat grain. The result showed that 5-element Maxwell and Burgers model were able to describe viscoelastic behaviors better. The relaxation stress decreased with the increasing moisture content from 6.79 to 23.35%, while the creep strain increased as well as the final percentage recovery decreased from 58.61 to 32.50%. In frequency sweep, storage modulus increased with the increasing frequency. In temperature sweep, there was a clear turning point in storage modulus, loss modulus, and tan delta curves with increasing temperature. The turning value of 167.47, 147.44, 134.27, 132.41, 110.28, and 92.62 °C detected in the tan delta were regarded as the best glass transition temperatures. This temperature was found to be lower than gelatinization heating temperature and decrease with the increase of moisture content. The crystalline structure of oat exhibited a typical A-type pattern and corresponding crystallinity increased from 22.03 to 31.86% with increasing moisture content. The scanning electron microscopy (SEM) micrograph of oat section was found that the size and adhesive effect of starch granules increased due to hydration.

Viscoelastic analysis of oat grain within linear viscoelastic region by using dynamic mechanical analyzer