English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Anionic effects are demonstrated with Mg-salts and free acids in high alcohol content organosolv pulping. Not all catalysts examined could effectively liberate the fibers from the wood matrix. The best result was obtained with the 0.025 M MgCl 2  catalysis system, at which nearly 60% screened pulp, with viscosity of 19.9 cPs., can be produced. Mg(NO 3 ) 2  was found capable of liberating fibers, however, under the conditions set for the experiment, complete fiber liberation was not achieved. In contrast, MgSO 4  and Mg(CH 3 COO) 2  were incapable of fiber liberation in themselves. On the other hand, in acid form, HCl and H 2 SO 4  were capable of liberating the fibers, whereas HNO 3  and CH 3 COOH catalysts were found ineffective. Especially with H 2 SO 4 , it should be noted that this catalysis system created a very strong hydrolyzing effect that unselectively destroyed both lignin and carbohydrates, resulting in severely damaged pulp which is useless for papermaking purposes. Therefore, choosing a suitable catalyst is the key factor for producing an organosolv pulp at high yield and with good fiber quality.

Anionic effect in high concentration alcohol organosolv pulping