English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the zaia usage as premium feature

ZAIA

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the access of premium content as premium feature

Premium Content

Zendy Tools

Zendy Open

European oak wood (W) was thermo-mechanically modified (TM) via densifying at 100 and 150°C and the surface properties of the TMW were investigated. The contact angle (CA) of the wood with the reference liquids water and diiodomethane was determined using the sessile drop method. The surface free energy of the TMW on tangential sections within the first 60 s after applying a drop was analyzed. The roughness parameters Ra and Rz parallel (‖) and perpendicular (⊥) to the grain were investigated. The wettability analysis showed that densified wood had a higher CA and lower work of adhesion and surface free energy than non-densified wood. An X-ray photoelectron spectroscopy [XPS or electron spectroscopy for chemical analysis (ESCA)] analysis showed that the oxygen to carbon atoms ratio (O/C ratio) of densified wood surface was lower than that of non-densified wood. The carbon C1-C2 atoms ratio (C1/C2 ratio) increased with increasing TM temperature. The results were interpreted as being that extractives migrate to the surface and amorphous and glassy polymers, i.e. lignin and hemicelluloses, in wood are rearranged. Increasing densification temperature makes TMW surfaces more hydrophobic.

Surface chemical composition and roughness as factors affecting the wettability of thermo-mechanically modified oak ( Quercus robur L.)