English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

Removing water from wood is a critical requirement for applications in building and construction and for chemical modifications. Normally, green radiata pine ( Pinus radiata  D. Don) timber, with a moisture content (MC) range at harvest between 150% and 200%, is kiln dried to below fiber saturation point (FSP) to 10–14% MC. In the present work, a physical-chemical-mechanical dewatering process is presented, which involves pressure cycling with supercritical CO 2  to remove water to near the FSP. When the CO 2  was cycled from ∼4 MPa into the supercritical state, at pressures up to 20 MPa, specimens of cross-sectional dimensions of up to 52 mm were successfully dewatered from a MC of 174%, typical of the green state, to approximately 39% in seven cycles. The specimens with the smallest cross-sectional dimensions dewatered more slowly than the larger specimens. Preheating the green wood before loading it into the dewatering vessel increased the rate of dewatering. The final MCs were similar in all experiments and were independent of specimen dimension (15–52 mm) or preheating temperature between 40°C and 60°C. Pressure-temperature phase diagrams show that it is necessary to compress the CO 2  to the supercritical state for efficient dewatering. Diffusion rates and solubility of CO 2  in sap were important, but channel opening within specimens was proposed to be a critical factor in the dewatering process. The reason why pressure-based experiments remove water from wood to an MC greater than the established FSP of 30% is not yet clear.

Effect of specimen dimension and pre-heating temperature on supercritical CO 2 dewatering of radiata pine sapwood