English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

This work was aimed at applying vacuum-assisted resin transfer molding (VARTM) technique to reinforced polymer molding products made of vegetable fibers. Kenaf ( Hibiscus cannabinus  L. Malvaceae) bast fibers were preformed into mat by means of a cold press. The unsaturated polyester resin was infused into the preforms at a vacuum pressure of 1.3–1.6 kPa. The examination of the mechanical properties and microstructure of the prepared composites indicated that the modulus of elasticity (MOE), modulus of rapture (MOR), and tensile strength (TS) of the VARTM composites were increased by 65.5%, 30.7%, and 41.7%, respectively, compared to the traditional hot-pressing composites. The dynamic mechanical analysis (DMA) revealed that the VARTM composite moduli in the temperature range of -50°C–200°C were doubled. The observations by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and mercury porosimetry confirmed that the interfacial compatibility between the kenaf fibers and the polyester resin was substantially improved.

Property enhancement of kenaf fiber composites by means of vacuum-assisted resin transfer molding (VARTM)