English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Pinus radiata  D. Don wood chips were submitted to a hydrothermal (HT) process, which is a pretreatment with pressurized water at P-factors of 20 (E1) and 1200 (E2), leading to 27% and 56% of hemicellulose removal, respectively. The residual wood chips were pulped by the chemithermomechanical (CTMP) and kraft processes. The pulp yield in the HT/CTMP process was in the range of 56–75%. The cellulose yields were not affected by the HT pretreatment, whereas the solubilization of hemicelluloses and lignin was intensified. The HT process provided energy savings in the refining of CTMP pulps, and the E1/CTMP pulp had a similar tensile and increased tear strength as the control wood. For kraft pulping, the HT wood chips demanded more active alkali (AA) to achieve a κ number (KN) of 30, and consequently, a decrease in pulp yield was observed (47.2% yield in the control and 44.4% and 37.8% in the E1 and E2 pulps, respectively). The fiber length decreased in the E1 and E2 kraft pulps compared with their control samples. In the E1 pulps, the tensile, tear, and burst indexes decreased by 10%, 25%, and 30%, respectively. Considering the low hemicellulose content and pulp viscosity in the range of 800–900 ml g -1 , the mild HT process of  P. radiata  would be better suited for preparing cellulose-rich materials instead of paper-grade pulps under the biorefinery concept.

Chemithermomechanical and kraft pulping of Pinus radiata wood chips after the hydrothermal extraction of hemicelluloses