English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

The main goal of this research is modeling and simulation of ethylene production through naphtha thermal cracking in a coil furnace reactor. The naphtha cracking and decoking processes are modeled based on the mass, energy and momentum balance equations considering a detail kinetic model at pseudo-dynamic condition. To develop a reliable and applicable model, a detail thermal model is considered to predict tube skin temperature. To prove accuracy of developed model and considered assumptions, the simulation results are compared with the plant data. In addition, the results of coke burning in the decoking cycle by mixture of air and steam are presented. It is appeared that ethylene production decreases during the process run time gradually. The simulation results proved that increasing feed temperature, feed pressure and combustion chamber temperature during the process run time is a practical solution to maintain production capacity at an acceptable level. Finally, the optimal operating condition of thermal cracking process is calculated during the process run time based on the time variant feeding policy to achieve maximum ethylene production capacity. It is appeared that applying optimal condition on the system could increase ethylene production capacity from 15.31 ton.h ‒1  to 15.49 ton.h ‒1 .

Simulation and Dynamic Optimization of an Industrial Naphtha Thermal Cracking Furnace Based on Time Variant Feeding Policy