English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Anodic protection (AP) is one of the corrosion control methods that has been widely used in the manufacture, storage, and transport of sulfuric acid. The present paper gives a brief review of the history, some applications, and a case study of failure causes and remedial actions of AP in a sulfuric manufacturing plant. The AP system consists of a direct current source, cathodes, reference electrodes, and signal conditioning electronics. In a sulfuric manufacturing plant, for AP of 316L piping (as an anode), platinized titanium (Pt/Ti) and Hastelloy B-2 were used as reference and cathode electrodes, respectively. After seven years of operation of the AP system in the sulfuric acid plant, a section of the protected pipelines has severely corroded. The study of the system showed that the reference electrodes, which were titanium-electroplated with platinum, lost their stability in the acid with the loss of coating and caused overprotection. However, the system could not control the pipe’s potential in the AP situation. In this condition, accelerated corrosion of the cathodes and pipes has also occurred.

Anodic protection of 316L stainless steel piping in sulfuric acid service: failure causes and remedial actions