English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

The influence of compressibility around an isolated inverted wing at a fixed Reynolds number was examined as relevant to the issue of wind tunnel scaling effects. Three-dimensional simulations were conducted for low ground clearances, at: full scale and a Mach number of 0.088, at 50% scale at Mach 0.176, and at 25% scale at Mach 0.352. As the scale was reduced, the increasing peak local Mach number between the wing and the ground resulted in a higher propensity of the flow to separate towards the trailing edge, and for incompressible or full-scale CFD to underestimate the lift and drag coefficients by an ever-increasing margin. The lower vortex path was less affected. The results suggest that compressible CFD of a scale experiment ought to be conducted at the same Reynolds number and Mach number as the tunnel test for the best possible correlation at free-stream Mach numbers beyond 0.15.1 page(s

Implications of compressibility effects for Reynolds-scaled testing of an inverted wing in ground effect