English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

U-shaped thin-walled concrete bridge beams usually suffer the combined actions of flexure, shear and torsion, but no research about the behavior of U-shaped thin-walled RC beams under combined actions has been reported in literature. Three large specimens of U-shaped thin-walled RC beams were tested under different torque–bending moment ratios (T–M ratios) of 1:5, 1:1 and 1:0 to investigate the mechanical responses such as crack patterns, reinforcement strains, failure modes and ductility. The testing results showed that ductile flexural failures occurred for all three of the U-shaped thin-walled beam specimens, although the combined shear effect of circulatory torque, warping torque and shear force increased as the T–M ratio increased from 1:5 via 1:1 to 1:0, reflected by diagonal cracks and stirrup strains. More specifically, basically symmetrical flexural failure was dominated by the bending moment when the T–M ratio was 1:5; flexural failure of the loaded half of the U-shaped thin-walled section was dominated by the combined action of the bending moment and warping moment, while there were only a few cracks on the other half of the U-shaped section when the T–M ratio was 1:1; and anti-symmetrical flexural failure was dominated by the warping moment when the T–M ratio was 1:0 (pure torsion). A simple method to calculate the ultimate load of such U-shaped thin-walled RC beams under different T–M ratios was suggested, and the calculating results were corresponding well with the experimental results.

Experimental and Analytical Studies of U-Shaped Thin-Walled RC Beams Under Combined Actions of Torsion, Flexure and Shear