English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

This study was conducted to investigate the rheological behavior of sugi boxed-heart timber under constant moisture content (MC) using a cantilever creep test. The focus of the study was the effect of temperature on viscoelastic creep behavior of surface- and inner-layer specimens of the timber. The specimens with dimensions of 75 mm in length, 25 mm wide, and 3 mm thick were prepared. A cantilever creep test with an effective span of 40 mm was conducted under a constant temperature of 20, 65, 80, and 95 °C. The equilibrium moisture content (EMC) of the specimens was set to around 12% at each temperature. A load representing 20% of rupture load of the specimens at each temperature was applied to their free-end and strain gauges were bonded at the fourth span (10 mm) on the upper and bottom surfaces of the specimens. Loading and unloading duration were set for 300 and 180 min, respectively, and a four-element Burgers model was used to model the creep behavior of the timber. It was found that temperature had significant effects on the creep properties of the timber. The surface strain and creep compliance of the surface- and inner-layer specimens tended to increase as the temperature increased. Creep compliance of the surface-layer specimen was higher than that of the inner-layer specimen at each temperature. Fitting the experimental data with the Burgers model used in this study shows good agreement and it was found that elastic (instantaneous) and viscoelastic (delayed) creep compliance of all the specimens tended to increase as the temperature increased. On the other hand, the viscosity of the dashpot element of both the Maxwell and the Kelvin unit tended to decrease as the temperature increased. Although different in magnitude, the creep-recovery compliance parameters had the same tendency as the creep compliance parameters.

Viscoelastic creep behavior of surface- and inner-layers of sugi boxed-heart timber under various temperatures