English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Taking a 62 m CFST bridge with a curved-string truss as the research object, according to its reinforcement scheme, the spatial finite element models of the bridge before and after reinforcement were established by using the general finite element software ANSYS. The natural frequencies of the bridge before and after reinforcement were calculated, and the seismic performance of the bridge was analyzed by using the response spectrum method. The results show that the frequencies of the reinforced bridges increase in varying degrees, especially the vertical and torsional frequencies. Before and after reinforcement, the maximum axial force in the upper chord of the bridge is the largest, and the shear force and bending moment are small. The maximum internal force appears at the two ends of the upper chord. This position should be regarded as the weak link of the bridge seismic resistance. Under the same conditions, the axial force of the bridge after reinforcement is reduced by about 30% compared with that before reinforcement, and the displacement of the bridge after reinforcement is reduced in varying degrees. The reinforcement measures can improve the lateral and vertical stiffness of the bridge, especially the stiffness of the deck system.

Reaction Spectrum Comparative Analysis of Seismic Performance of 62 m CFST Bridge with Curved-String Truss before and after Reinforcement