English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

The transparent conductive molybdenum-doped zinc oxide (MZO) was deposited onto a flexible polyethersulfone (PES) substrate by using an ion beam sputtering system. An argon ion beam was used to sputter an MZO target at constant pressure of 0.67 Pa and substrate temperature of 130∘C with varying the oxygen flow rate from 0 to 12 sccm. The influences of additional oxygen flow on the microstructure, optical, and electrical properties of films were investigated. The obtained MZO films present a crystalline structure. With increasing the oxygen flow rate, their electrical resistivity increases, and the optical band gap decreases from 3.46 to 3.20 eV. The film deposited in the atmosphere without introducing oxygen exhibits the best optical transmittance of 82.9% at 550 nm wavelength, electrical resistivity of 8.32 × 10−3 Ω cm, carrier concentration of 6.82 × 1020 cm−3, and carrier mobility of 2.45 cm2/Vs.

Effects of Additional Oxygen Flow on the Optical and Electrical Properties of Ion Beam Sputtering Deposited Molybdenum-Doped Zinc Oxide Layer