English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

In this paper we study the etching behavior and the resulting roughness in photoresist-masked isotropic silicon plasma etch performed in an inductively coupled plasma ICP etcher using SF6. We report detailed observations of the resulting roughness for various etching parameters, covering: pressure from 2.5 to 70 mTorr, SF6 flow rate from 50 to 300 sccm, platen power from 0 to 16 W, and ICP power from 1000 to 3000 W. Etch processes with a normalized roughness below 0.005 were found at low pressure, p = 10 mTorr, while larger normalized roughness, above 0.02, occurred at higher pressures, p = 40‐70 mTorr. Here the normalized roughness is the ratio of the roughness amplitude to the etch depth. The rough etching processes showed characteristic high-aspect-ratio and crystal-orientation-dependent surface morphology. The temporal evolution of this roughness was studied, and observations suggest a gradual buildup of surface contamination redeposits originating from the photoresist mask. A model was used to analyze the etched profiles with respect the internal etching conditions. The almost isotropic etching profiles, obtained in both rough and smooth etching processes, are generally highly radical-dependent; however, the surface roughness itself can be reduced dramatically using an ion energy above a certain threshold value. The roughness causing mechanism is discussed.

Study of the Roughness in a Photoresist Masked, Isotropic, SF[sub 6]-Based ICP Silicon Etch