English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

Ultrathin Zr silicate films were deposited using Zr(Oi\uadPr)2(tetramethylheptanedione,thd)2, Si(Ot\uadBu)2(thd)2 and nitric oxide in a pulse-mode metallorganic chemical-vapor deposition apparatus with a liquid injection source. High resolution transmission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy (XPS), and medium energy ion scattering were employed to investigate the structure, surface roughness, chemical state, and composition of the films. The nitric oxide used as oxidizing gas, instead of O2, not only reduced the thickness of the interfacial layer but also removed the carbon contamination effectively from the bulk of the films. The as-deposited Zr silicate films with a Si:Zr ratio of 1.3:1 were amorphous, with an amorphous interfacial layer 0.3-0.6 nm thick. After a spike anneal in oxygen and a 60 s nitrogen anneal at 850\ub0C, these films remained amorphous throughout without phase separation, but the interfacial layer increased in thickness. No evidence of Zr\uadC and Zr\uadSi bonds were found in the films by XPS and carbon concentrations <0.1\u2009atom%, the detection limit, were obtained. The hysteresis, fixed charge density, and leakage current determined from capacitance-voltage analysis improved significantly after postdeposition anneals at 850\ub0C and the films exhibited promising characteristics for deep submicrometer metal-oxide-semiconductor devices.Peer reviewed: NoNRC publication: Ye

Ultrathin Zirconium Silicate Films Deposited on Si(100) Using Zr(O[sup i]-Pr)[sub 2](thd)[sub 2], Si(O[sup t]-Bu)[sub 2](thd)[sub 2], and Nitric Oxide