English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Pro

Presents the zaia usage as premium feature

ZAIA

Presents AI Discovery search usage as a premium feature

AI Discovery

Presents AI Discovery explain and summary usage as a premium feature

Content Analysis

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Presents the pdf analysis as premium feature

PDF Analysis

1500 Top-up

3000 Top-up

Zendy Basic

2500 Top-up

Zendy Unlimited

Presents the access of premium content as premium feature

Premium Content

Heat transfer results for a given slot shaped channel with a 3:1 aspect ratio are presented using various methods to enhance swirl in the channel including helical shaped-trip-strips and swirl-jets issuing from the side walls. Four different configurations of the swirl jets and one configuration of the helical trip strips were studied. The Reynolds numbers investigated range from 10,000 to 50,000 and are based on the mean velocity of the fluid at the channel inlet, or when swirl-jets are used, the equivalent mass flow rates at the exit of the main channel. Independently these heat transfer enhancement strategies have proven to be effective in either round channels, in the case of swirl jets and helical protrusions, or rectangular channels, in the case of trip strips. A transient technique combined with Duhamel’s superposition theorem was used to obtain the heat transfer coefficient distributions. Narrow-band liquid crystals were used to map the transient surface temperatures and were combined with thermocouples that measured the bulk-air temperatures along the flow path in the main channel. The results for the tests reported in this paper show mean heat transfer enhancement values (Nu/Nuo ) greater than 4.5 and low normalized friction factors. Thermal performance factors ranged from 1.1–3.3 for the various configurations studied. These results show significant improvements over other types of heat transfer enhancement methods currently used in the mid-span section of turbine blades.Copyright © 2010 by ASME

Internal Cooling Using Novel Swirl Enhancement Strategies in a Slot Shaped Single Pass Channel