English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Tools annual

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Presents the access of premium content as premium feature

Premium Content

Global: Zendy Plus annual

Global: Zendy Free Plan

In this paper, in-band continuous mode transferring (CMT) method is presented for designing broadband Doherty power amplifier (DPA). Specifically, transferable continuous mode, transferring between class-J continuum to class-F<sup>-1</sup> continuum, is introduced into DPA at output back-off (OBO) power level for improving bandwidth and efficiency. For validation, a broadband DPA with operation mode transferring from continuous class-J to continuous class-F<sup>-1</sup> is designed, fabricated and measured. Experimental results show the drain efficiencies (DEs) of the fabricated DPA are 46.3%-57.7% and 58.4%-69.1% at 6 dB OBO and peaking power levels over 1.7-2.6 GHz. The saturation power of this DPA is 43.1-45.2 dBm with a gain of 9.1-11.2 dB in the interested band. Furthermore, when the fabricated DPA is stimulated by a 20 MHz wideband signal with a peak-to-average power ratio (PAPR) of 7.05 dB at 2.4 GHz, the measured average power is 36.5 dBm with an average DE of 45.7%, and the measured adjacent channel leakage ratios (ACLRs) are -31.9 dBc and -50.4 dBc before and after DPD technique, respectively.

Broadband Doherty Power Amplifier With Transferable Continuous Mode