English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

This paper describes a direct-conversion E-band transmitter (TX) in 65-nm CMOS. To demonstrate the feasibility of E-band 1024-quadrature amplitude modulation (QAM), a 67 to 86 GHz direct-conversion CMOS transmitter with broadband image rejection is presented. The transmitter contains an I (in-phase) and Q (quadrature-phase) modulator and a five-stage power amplifier. To achieve a 40 dBc image-rejection ratio (IRR) of the I/Q modulator for E-band, a broadband half-quadrature generator (HQG), which contains a composite right/left-handed (CRLH) based divider, quadrature couplers, and baluns is proposed. For the purpose of minimizing the phase imbalance, phase balance lines are utilized in HQG to achieve a 1-degree phase accuracy under different tuning lines. Subsequently, the reflection can be mitigated by optimizing the impedance matching between the HQG and the mixer core. Meanwhile, because millimeter-wave (MMW) circuits are susceptible to process variations, a process-variation-tolerant design is introduced to mitigate IRR variation, especially under 40 dBc. The transmitter demonstrates a measured flat conversion gain (CG) of 23&#x00B1;2 dB from 56 to 86 GHz. The proposed TX achieves an IRR better than 40 dBc from 67 to 86 GHz (bandwidth of 19 GHz) with a peak IRR of 56.2 dBc at 70 GHz. Furthermore, the proposed TX has exhibited a 6 bit/s/Hz spectral efficiency with 1024-QAM under the orthogonal frequency-division multiplexing (OFDM) modulation format. The 1.129 mm<sup>2</sup>~E-band TX achieves a measured output power of 6.5 dBm with a total dc power consumption of 164 mW from a 1.2 V supply voltage.

A 67-86 GHz Spectrum-Efficient CMOS Transmitter Supporting 1024-QAM With a Process-Variation-Tolerant Design