English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The present study investigates the effect of brazing parameters on reaction layer formation, and mechanical properties of C/SiC composite-Ti6Al4V alloy joints produced by brazing technique. The wetting mechanism of the C/SiC composite surface by the Ag-Cu-Ti-based active brazing filler alloy has also been studied and correlated with the reaction layer formation. The strength of C/SiC composite/Ti6Al4V alloy joints increased at first and then decreased with increasing reaction layer thickness. The joints with ⁓1-µm-thick reaction layer, which were obtained by brazing at 915°C for 15 min, had the highest shear strength of ⁓33 MPa. Brazing filler alloy presented a minimum contact angle of 15° on the C/SiC composite surface at 915°C during the wetting experiments. 915°C and 15 min were determined to be the optimised brazing parameters to ensure almost complete wetting and a uniform reaction layer for effective adhesion of the C/SiC composite surface.

Wetting behavior and reaction layer formation in C/SiC composite-titanium alloy joints