English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Experiments have been performed to study the effect of enhanced surfaces including micro-finned, micro-/nano-coated (coating thickness of 100 µm and 200 µm) and hybrid surface on heat transfer coefficient and critical heat flux using spray cooling. Commercial HFE-649 coolant obtained from 3 M Corporation has been used to spray over copper heater of 10 mm 2  cross-sectional area using a full cone pressure swirl nozzle with 0.51-mm orifice diameter. The pressure swirl nozzle squeezed the incoming fluid and dispersed into spray droplets in the volumetric flux range between 1.0 and 4.5 cm 3 /cm 2 s. Results have been obtained for various surfaces at optimum distance of nozzle-to-surface and comparison is done with the plain surface. Findings revealed that heat transfer performance improved considerably with hybrid surface, which showed at least 360% enhancement in heat transfer coefficient and 72.9% in critical heat flux in contrast to the plain surface. An improvement of 7.1% in critical heat flux is observed for hybrid surface in comparison with other enhanced surfaces. Furthermore, experiments were conducted to examine the effect of inclination angle (0°, 15°, 30°, and 45°) on heat transfer performance. The heat transfer coefficient, critical heat flux, and cooling efficiency all improved dramatically at 15°C inclination angle. In comparison with horizontal spray, an improvement of 18.9% and 20.1% in heat transfer coefficient and critical heat flux, respectively, have been observed. However, heat transfer performance degraded with the further increase of inclination angle. Other experimental parameters remain constant, such as the volumetric flux, spray height, and spray pressure.

Experimental study on effect of enhanced surfaces and inclined mode on spray cooling heat transfer performance using HFE-649 coolant