English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The blue light hazard (BLH) and luminous efficacy of a source () are associated with the photobiological safety and energy saving of light-emitting diodes (LEDs), respectively. In this study, we used genetic algorithm (GA) to optimize the BLH,, and color rendering parameters of five-chip hybrid white LEDs. Based on the optimal results, we used five-chip LEDs to obtain the hybrid white light. Their peak wavelengths were 461.5 (blue), 523.9 (green), 588.2 (orange), 643.3 (red), and 694.2 nm (far-red), respectively. In practice, the blue light hazard efficiency of radiation (BLHER) of the hybrid white light was less than 0.10, which was lower than half of the most common light sources. Theranged from 51.6 to 115.6 lm/W at correlated color temperature (CCT) from 2700 to 6500 K. On average, the CIE general color rendering index (Ra), CIE special color rendering index for the ninth deep red test sample (R9), ANSI/IES TM-30 color fidelity index (Rf), and color gamut index (Rg) of hybrid white light were 91.3, 87.8, 83.3, and 96.7, respectively. The melanopic efficacy of luminous radiation () was tunable in the range of 0.60 to 1.35 mW/lm. These results demonstrated that we used far-red LEDs to fabricate white light with low BLH and relatively high efficiency.

Utilization of far-red LED to minimize blue light hazard for dynamic semiconductor lighting