English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

This study aimed to propose a segmented influent method to inhibit sludge bulking. The sludge bulking phenomenon was observed in a A2/O coupled system treating municipal wastewater under low temperature (15 ± 0.5)°C. Adopting the segmented inlet water process, the distribution ratio of the inlet flow in the anaerobic zone and the aerobic zone were 2:1 and 1:1, the sludge bulking phenomenon was suppressed. The sludge loading rate (F/M) analysis showed that the F/M of the anaerobic zone with single-point inflow was only 0.15 kg COD·(kg MLSS·d) −1 , which was prone to induce sludge bulking. However, the F/M concentration gradient of the system under segmented inlet water conditions was obvious, which could inhibit the sludge bulking caused by low F/M. The effluent removal results showed that the system had high removal rates of COD, NH 4+ -N, TN, and TP at a flow distribution ratio of 2:1, with average removal rates of 88.85% ± 2.94%, 91.26% ± 6.68%, 76.60% ± 5.60%, and 96.80% ± 2.17%, respectively. This study confirmed that the segment inlet method inhibited sludge bulking, while the flow distribution ratio of 2:1 also ensured efficient pollutant removal capacity of the system.

Study on the inhibition of sludge bulking in A 2 /O coupled system at low temperature by segmented inlet water mode