English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The adhesion strength between electroless copper and acrylonitrile-butadiene-styrene (ABS) resin could be improved significantly by MnO 2 -H 3 PO 4 -H 2 SO 4  colloid system. In this paper, when the concentrations of H 3 PO 4  and H 2 SO 4  in the colloid were 4.2 and 10.4 M, respectively, the effect of the ultrasound-assisted etching (UAE) time on the etching performance of ABS resin were investigated. With the UAE for 10 min, much more uniform cavities formed on the ABS surface, the average surface roughness ( R a) decreased from 143 to 107 nm, which was much lower than etched by CrO 3 -H 2 SO 4  colloid (420 nm). Though the average surface roughness ( R a) was decreased, the average adhesion strength between the electroless copper film and ABS substrate increased from 1.39 to 1.60 kN m −1 , which was also higher than chromic acid etching treatment (1.42 kN m −1 ). The density of the hydrophilic groups and the uniformity of cavities on the ABS surface were increased with the UAE, which resulted in high adhesion strength and low average surface roughness.

Adhesion improvement of ABS resin by MnO 2 -H 3 PO 4 -H 2 SO 4 colloid with ultrasound-assisted etching treatment