English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Tools annual

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Presents the access of premium content as premium feature

Premium Content

Global: Zendy Plus annual

Global: Zendy Free Plan

Appropriate arrangement of the fin structures in the evaporator and condenser not only enhances the heat transfer coefficient but also suppresses the increase of pressure drop. Due to this reason, a new method of using large-scale pin fins is explored to increase the heat transfer area and to modify the liquid film flow characteristics in the enhanced tubes. In the present study, four enhanced tubes and one plain tube were manufactured by selective laser melting. The working fluid is R407C and the enhanced tubes are eight short pin fins tube, five long pin fins tube, twisted pin fins tube and a tube filled with metallic foam. The results show that the shorter fin tube has the largest heat transfer coefficient for condensation at 3967 W/m 2 ⋅K and the metallic foam tube demonstrates the largest heat transfer coefficient for boiling at 10606 W/m 2 ⋅K. However, the shorter fins have the highest efficiency indices based on the heat transfer coefficient-pressure drop evaluation criterion and the heat transfer coefficient-area evaluation criterion. For condensation, the indices are 1.28 and 1.35, respectively. For boiling, the indices are 2.55 and 1.62, respectively.

Experimental Study of Flow Boiling and Condensation in Tubes with Pin-Fin and Metallic Foam Structures