English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In this study, the microstructure and mechanical properties of martensitic hot-work tool steel AISI H13 produced by laser powder bed fusion (LPBF) under argon atmosphere in different LPBF process times were analysed in the as-built, hardened and tempered (HT) and hot isostatic pressed, hardened and tempered (HIP+HT) condition and compared to conventionally manufactured reference material. Three parameter sets were selected to adjust an initial defect density of 0.6%, 0.9% and 2.2% and thus process time reductions of 17% and 29%. We observed a change in the defect type from almost argon-free microcracks to argon-filled pores with higher scan velocities. Argon embrittlement was evident also in the results of tensile, notched impact toughness and fatigue tests. After HIP+HT a fatigue strength of 972 MPa was obtained for the set with 0.6% microcracks, but only 775 MPa and 718 MPa were obtained for samples with argon porosity.

powder metallurgy

Influence of initial defect density on mechanical properties of AISI H13 hot-work tool steel produced by laser powder bed fusion and hot isostatic pressing