English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

We investigate the image quality and beam intensity of thermal neutron radiography after replacing a standard single-channel neutron collimator with a compact array of microcollimators. In this study, the MCNP6 Monte Carlo computer code was used to simulate a 2 × 2-cm-area isotropic thermal neutron source, which then was collimated by an array of micron-sized neutron collimators that measured 29.8 μm in diameter and with lengths that varied from 0.6 to 3 mm. These microcollimators were spaced 30 μm apart and assembled into a 2 × 2-cm array. The image quality of the neutron beams produced by the resulting collimator arrays was assessed by imaging the edge of a very thin (~0.01-mm) gadolinium foil to obtain the image Modulation Transfer Function (MTF). The MCNP6 resulting flux map from each simulation then was converted into a grayscale .tiff image and the image’s resulting MTF obtained using the ImageJ computer program with the imaging beam geometric unsharpness, which is a limiting factor in the image resolution determined at the 10% value of the MTF curve. In this study, we found that a 2 × 2× 0.298-cm microcollimator, corresponding to a length-to–hole diameter ratio of 100:1 and a collimator length of 2.98 mm produced a beam with a geometric unsharpness of 32 μm. Compared to a standard single-channel collimator with a 2 × 2-cm aperture, the single-channel collimator would need to be 660 cm long to produce an equivalent geometric sharpness. Yet because of its shorter length, the imaging beam intensity from our 2.98-mm-thick collimator array was approximately 50 times greater than that of an equivalent single-channel collimator.

Analysis of the Neutron Radiographic Image Quality and Beam Intensity Produced by a Compact Multichannel Collimator