English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

The differential strain behavior of TaxW1-xB solid solutions has been studied as a function of composition using high-pressure radial X-ray diffraction in a diamond-anvil cell under non-hydrostatic pressure (up to ∼65 GPa) to understand the hardening mechanisms in this family of materials. The hardness of tungsten monoboride (WB) can be increased by adding tantalum and reaches a maximum at a doping level of 50 at. % with a value of 42.8 ± 2.6 GPa under an applied load of 0.49 N. Plateaus were observed in the differential strain data for both the (020) and (002) directions, suggesting that this is the primary slip system in this material. These plateaus were modified by the addition of Ta, indicating that strengthening of the (002) and (020) planes by solid solution hardening was primarily responsible for the hardness enhancements in TaxW1-xB solid solutions. In contrast, the differential strain supported by the (200) plane linearly increases with pressure up to the highest pressures reached in this work (>60 GPa) and shows almost no change with metal composition. Because of the very different compression behavior in the (200) and (020) planes, change in the b/a ratio with pressure provides a unique way to visualize the onset of plastic behavior. This onset varies from ∼15 GPa for samples with 5% Ta to more than 30 GPa for the sample with 50% Ta. In addition, the ambient bulk modulus of each solid-solution sample was determined using the second-order Birch-Murnaghan equation-of-state and found to be ∼340 GPa for all phases.The differential strain behavior of TaxW1-xB solid solutions has been studied as a function of composition using high-pressure radial X-ray diffraction in a diamond-anvil cell under non-hydrostatic pressure (up to ∼65 GPa) to understand the hardening mechanisms in this family of materials. The hardness of tungsten monoboride (WB) can be increased by adding tantalum and reaches a maximum at a doping level of 50 at. % with a value of 42.8 ± 2.6 GPa under an applied load of 0.49 N. Plateaus were observed in the differential strain data for both the (020) and (002) directions, suggesting that this is the primary slip system in this material. These plateaus were modified by the addition of Ta, indicating that strengthening of the (002) and (020) planes by solid solution hardening was primarily responsible for the hardness enhancements in TaxW1-xB solid solutions. In contrast, the differential strain supported by the (200) plane linearly increases with pressure up to the highest pressures reached in this work (...

Understanding the mechanism of hardness enhancement in tantalum-substituted tungsten monoboride solid solutions