English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

High-Tc GdBa2Cu3O7 – delta superconductor bolometers with operation temperatures near 89 K, large receiving areas of 0.95 mm2 and very high detectivity have been made. The bolometers are supported by 0.62 µm thick silicon nitride membranes. A specially developed silicon-on-nitride layer was used to enable the epitaxial growth of the high-Tc superconductor. Using a gold black absorption layer an absorption efficiency for wavelengths between 70 and 200 µm of about 83% has been established. The noise of the best devices is fully dominated by the intrinsic phonon noise of the thermal conductance G, and not by the 1/f noise of the superconducting film. The temperature dependence of the noise and the resulting optimum bias temperature have been investigated. In the analysis the often neglected effect of electrothermal feedback has been taken into account. The minimum electrical noise equivalent power (NEP) of a bolometer with a time constant tau of 95 ms is 2.9 pW/Hz1/2 which corresponds with an electrical detectivity D* of 3.4 × 1010 cm Hz1/2/W. Similar bolometers with tau = 27 ms and NEP = 3.8 pW/Hz1/2 were also made. No degradation of the bolometers could be observed after vibration tests, thermal cycling and half a year storage. Measurements of the noise of a Pr doped YBa2Cu3O7 – delta film with Tc = 40 K show that with such films the performance of air bridge type high-Tc bolometers could be improved

Low noise high-Tc superconducting bolometers on silicon nitride membranes for far-infrared detection