English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Open

We investigated the influence of the presence of oxygen during the deposition of the calcium cathode on the structure and on the performance of polymeric light emitting diodes (pLEDs). The oxygen background pressure during deposition of the calcium cathode of polymeric LEDs was varied. Subsequently, the oxygen depth distribution was measured and correlated with the performance of the pLEDs. The devices have been fabricated in a recently built ultraclean setup. The polymer layers of the pLEDs have been spincoated in a dry nitrogen atmosphere and transported directly into an ultrahigh vacuum chamber where the metal electrodes have been deposited by evaporation. We used indium–tin–oxide as anode, OC1C10 PPV as electroluminescent polymer, calcium as cathode, and aluminum as protecting layer. We achieved reproducibility of about 15% in current and brightness for devices fabricated in an oxygen atmosphere of ≪10−9 mbar. For further investigations the calcium deposition was carried out in an oxygen atmosphere fr...

Influence of a partially oxidized calcium cathode on the performance of polymeric light emitting diodes