English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Experimental investigations on top surface of prismatic specimens, manufactured by Selective Laser Melting of IN 625 alloy, were carried out in order to assess the influence of laser power and scanning speed on edge and corner effects. Since the melt-pool behaviour is strongly influenced by the process parameters, all specimens were manufactured with no contour using the same layer thickness, hatch distance and scanning strategy at different levels of laser powers and scanning speeds. 3D laser surface scanning was performed in order to measure surface changes. The experimental results have revealed that melt-pool behaviour during solidification generates elevated ridges on both specimen sides and corners that are strongly influenced by the energy input. The edge ridges width increases with increasing the laser power and decrease with increasing the scanning speed, the rising of corners being much more pronounced. On the contrary, at constant laser power and variable scanning speeds the edge and corner ridges decrease.

Edge and corner effects in selective laser melting of IN 625 alloy