English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

This research aims to study the dissimilar tailor-welded blanks between DP590 and DP980 dual phase steels using the autonomous GTAW process. The summarized results are as follows. It was found that utilized welding parameters in DP590 and DP980 steel butt joint were able to achieve complete penetration joint and there were not any defects. Furthermore, the dissimilar weld zone produced the hardness profile value between the DP590 and DP980 base metal. In particularly, DP590-HAZ region resulted in harden zone. Meanwhile, DP980-HAZ region induced a soften zone. By the way, the harden DP590-HAZ exhibited fine columnar martensite with a ferrite matrix. On the other hand, the soften DP980-HAZ represented a tempered martensite structures. Comparing the tensile test was carried out in order to investigate dissimilar welded joint strength in the different rolling directions. It was suggested that the specimen welded along to rolling direction was evidently larger tensile strength (1092 MPa) than the welding transverse to rolling direction (638 MPa). Moreover, the weakest fracture occurred apparently on the region of DP590-BM rather than the HAZ region.

Comparative study of dissimilar tailor-welded blanks between DP590 and DP980 dual phase steels