English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

The hardmetal Cr3C2-25NiCr (180-220 μm thick) coatings have been produced on a steel substrate by a multi-chamber detonation sprayer (MCDS). The characteristic feature of MCDS is that the powder is accelerated by using combustion products that are formed in MCDS chambers and are converged before entering the nozzle, where they interact with the two-phase gas-powder cloud. The microstructures and properties of the hardmetal coatings were examined with the use of optical microscopy, scanning electron microscopy, X-ray phase analysis, and a Vickers hardness tester with a 300 g test load. Wear tests were carried out using a computer controlled pin-on-disc type tribometer. It was established that MCDS has provided the conditions for formation of a dense hardmetal Cr3C2-25NiCr (180-220 μm thick) coatings with a porosity of less than 0.02%, microhardness 540±210 HV0.3 and a specific wear rate of 9.08∙10-5 mm3(m∙N)-1

Structure and Properties of the Hardmetal Coatings Cr3C2-25NiCr Formed by a Multi-chamber Detonation Sprayer