English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The zero-point of indentation depth in nanoindentation or depth-sensing instrumented indentation tests should be precisely set to evaluate the indentation hardness and indentation elastic modulus of materials to be tested, especially at shallow depths. A critical contact stiffness value has been widely used to determine the zero-point in nanoindentation tests with a Berkovich tip using the continuous stiffness measurement (CSM) method. However, this criterion occasionally gives an inadequate zero-point owing to the surface roughness of materials, the vibration of the testing system, and the flaws of the CSM method at shallow depth. This study proposes a practical method to determine the effective zero-point of indentation depth, which was obtained linearly at the zero-point of contact stiffness and extrapolated from the depth-dependent contact stiffness values, except for those at initially unstable contact depths. The proposed method enables nanoindentation tests to obtain a constant indentation elastic modulus and low deviation of nanoindentation hardness of homogenously fused silica and metallic materials, which provides an efficient way to obtain more accurate test data.

scientific reports

Practical method to determine the effective zero-point of indentation depth for continuous stiffness measurement nanoindentation test with Berkovich tip