English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Effects of Mo addition on microstructures and crack tip opening displacement (CTOD) in heat affected zones (HAZs) of three high-strength low-alloy (HSLA) steels were investigated in this study, and the correlation between them was explained by fracture mechanisms related with martensite-austenite constituent (MA) characteristics. The coarse-grained HAZ (CGHAZ) consisted of acicular ferrite (AF), granular bainite (GB), and bainitic ferrite (BF), whereas the inter-critically heated HAZ (ICHAZ) consisted of quasi-polygonal ferrite (QPF), GB, and MA. Since Mo promoted the formation of GB, BF, and MA and prevented the formation of AF and QPF, the CTOD decreased in both HAZs with increasing Mo content. According to the interrupted three-point bending test results of the ICHAZ where many MAs were distributed in the QPF or GB matrix, many voids were observed mainly at MA/QPF interfaces, which implied that the void initiation at the interfaces was a major fracture mechanism. The atomic probe data of MAs indicated the segregation of C, Mn, Mo, and P at MA/QPF interfaces, which could result in the easy MA/matrix interfacial debonding to initiate voids. Thus, characteristics of MA/QPF interfaces might affect more importantly the CTOD than the MA volume fraction or size.

Effects of Mo addition on crack tip opening displacement (CTOD) in heat affected zones (HAZs) of high-strength low-alloy (HSLA) steels