English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Objectives  The purpose of this study was to examine the effect of different surface treatments of implant abutment and metal cope fitting surface on their bond strength to provisional resin cement.    Materials and methods  Sixty implant analogs and standard titanium abutments of 6 mm height were embedded vertically in autopolymerizing acrylic resin blocks. Metal copings with a loop on the occlusal surface were fabricated using nickel chromium (Ni–Cr) alloy. Samples were divided according to their surface treatment into three groups (n = 20 for each group); Group (1) air borne particle abrasion with 50 μm Al 2 O 3  powder. Group (2) air borne particle abrasion plus alloy primer. Group (3) samples were silicoated and silanated using cojet system. Each group was subdivided into two subgroups (n = 10 for each subgroup) according to storage condition and stressing; Subgroup (A) short-term water storage and Subgroup (B) short-term water storage and thermocycling plus mechanical loading corresponding to 6 month of clinical use. The copings were luted using provisional resin cement under static load of 3 kg. Samples were tested for tensile bond strength using a universal testing machine at a crosshead speed of .5 mm/min. Statistical analysis of the results and comparison between each two groups were performed using One Way ANOVA (significance at P ≤ 0.05) followed by post-hoc tests.    Results  Silica coating using Cojet system recorded significant highest mean values (5.190 MPa) followed by air borne particle abrasion (3.698 MPa), while using alloy primer on air abraded surface recorded the lowest bonding values (1.998 MPa). Subjecting the samples to short term water storage and thermocycling plus mechanical loading has led to significant loss of retentive values.    Conclusion  Cojet surface treatment and air borne particle abrasion recorded the superior results in this study.

Effect of various surface treatments of implant abutment and metal cope fitting surface on their bond strength to provisional resin cement