English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

In-depth investigation of microstructure evolution rules and flow localization characteristics in high strain rate deformation is helpful to improve the forming limit and forming accuracy of electromagnetic forming process. In present study, split Hopkinson pressure bar tests were carried out to obtain high velocity deformation with initial strain rate ranging from 1000s-1 to 5000s-1. Then, post-deformation samples of 5A06 alloy were analyzed with the aid of metallographic, SEM and TEM instruments. With the increase of strain rate, equiaxed α grains are elongated with an orientation perpendicular to the loading axis and the aggregated β grains become dispersively distributed along the grain boundaries. Adiabatic shear bands occur with elongated voids and band-like structures inside when the strain rate further increase to 4200s-1. Multi-slips operate at the same time and the dislocation structure patterns change from dislocation clusters to dislocation bands and stack faults and then to grain-like structures of approximately 500nm in size with the increase of strain rate. The absolute temperature of adiabatic shear band zone is calculated to be 442K utilizing mathematical model developed in this work, indicating that the grain-like structures could be in-situ sub-grains rather than recrystallization grains

Microstructure Evolution and Flow Localization Characteristics of 5A06 Alloy in High Strain Rate Forming Process